MH-WindGenerator CONTROL BOX
※ Exchange and refund
For returns and exchanges due to change of mind, the buyer is responsible for all shipping costs.
In addition, in the case of return or exchange of products that are in good working condition, the shipping cost is to be paid by the buyer.
Also, in case of cancellation at the buyer's responsibility, the PayPal fee will be paid by the consumer.
Please note this.
This item has been added to your cart.
This product can only be purchased for control box related components of MH-WindGenerator.
Please make sure to check the product configuration before purchasing.
"
MH-WindGenerator
MotionHouse WindGenerator is a device
that provides a haptic effect.
When MHServicer is used,
the wind speed changes according to the speed,
so you can feel the speed.
You can also use MotionHouse WindGenerator
to provide a haptic effect
in various application for users
by using MotionHouseSDK.
"
Product Composition
ⓐ Control Box
ⓑ USB Cable
ⓒ Power adapter
ⓓ Fan Connect Cable
* The above images may be changed or updated without prior notice.
How to connect extension wire and fan connector
* The above images may be changed or updated without prior notice.
Product Specification
Rated Voltage | 110 ~ 240 VAC, 50 / 60 Hz (12 VDC adapter) |
Power Consumption | Max 120W (Total use of 2 fans) |
Control Software | MHServicer Program |
Cable Length | FAN Connetion : 3 meter (3.5m -> 3m from December 1st, 20th) USB : 3 meter |
Assembly
Please refer to the link below for assembly instructions.
Or you can check the product assembly video on the Technical Support tab of the Motion House website.
※ Please check the video posted on the website.
"
MHServicer
MHServicer is MotionGear control software.
MHServicer is software that enables motion simulators to be easily driven
by receiving motion data from content.
MHServicer can easily adjust the range and intensity of motion
to be expressed in the motion simulator
according to the user's preference.
"
Racing | Experience | Flight | etc | Console |
---|---|---|---|---|
- iRacing - Assetto Corsa & Competizione - Race 07 - Grid Autosport - F1 2013 ~ 2020 - Live For Speed - rFactor 1, 2 - The Crew 1, 2 - Project Cars 1, 2, 3 - RaceRoom Racing - WRC 7, 8, 9 - RDS | - Richard Burns Rally - GTA5 - Red Dead Redemption 2 - Automobilista 1, 2 - Grid 1 & 2 - GRALLY - Forza Motorsport 7 - Forza Horizon 4 - KartKraft - Dirt2, 3, 4 - Dirt Rally & 2.0 & Showdown - Euro Truck Simulator 2 - American Truck Simulator - Fernbus Coach Simulator | - Microsoft Flight Simulator X - DCS world - War Thunder (only plane) - X-plane 10, 11 - Falcon4.0 BMS - AeroFly Flight Simulator 2 - No Limits 2 - Prepar3D V4 - Hyper Storm | - Design it, Drive it - Speedboats - MudRunner - Red Rover - MX-Bikes - BeamNG. drive - Touring Karts - V-Racer Hoverbike | [PS4 & Xbox one] - Project Cars 1, 2, 3 - F1 2016 ~ 2020 - Assetto Corsa [Only Xbox one] - Forza Motorsport 7 - Forza Horizon 4 |
How to install and use MHServicer
< Supported Windows 10, 11 [32bit, 64bit] >
Please follow the link below to download the latest version of MHServicer.
For how to use, please refer to the document in the downloaded MHServicer folder.
Click!
"
MotionHouseSDK
MotionHouseSDK can be easily linkage
with game development engines such as Unity / Unreal.
In addition, MotionHouseSDK's motion expression setting function
and motion range setting function can realize various types of
sensation effects required by content.
"
※ For detailed description or technical support for SDK, please contact homepage or motionhouse.master@gmail.com.
AS Warranty period
Personal : 1 Year
Business : Contact us
Please check the Technical Support tab for details.
< The noise generated during fan operation is the noise generated by the fan itself. >
< As it is a normal product with no quality problems, please use it with confidence. >
Model : MH-WindGenerator | |
---|---|
Certificate : KC Code No : R-REM-mh1-MH-WIND Manufacturer / Manufacturing Country : Motion House Co., Ltd. / Korea | Rated Voltage : 220VAC, 50/60Hz (12VDC adapter) Power : Max 120W(Fan 2ea) |
Product Weight - Fan : 0.9 kg(1ea) - ControlBox : 0.8kg - Bracket : 3.5kg | Product Size - FAN : 155 x 215 x 135 (mm) - ControlBox : 130 x 110 x 55 (mm) - Bracket : 815 x 140 x 105 (mm)[Assembly] - Cable Length : 3000 (mm) (3.5m -> 3m from December 1st, 20th) |
Connect : USB 2.0 or 3.0 Data rate : 60 times per second | Control Software : MHServicer Support SDK : Unity, Unreal, C, C++ * Support Emulator |
This product can only be purchased for control box related components of MH-WindGenerator.
Please make sure to check the product configuration before purchasing.
"
MH-WindGenerator
MotionHouse WindGenerator is a device
that provides a haptic effect.
When MHServicer is used,
the wind speed changes according to the speed,
so you can feel the speed.
You can also use MotionHouse WindGenerator
to provide a haptic effect
in various application for users
by using MotionHouseSDK.
"
Product Composition
ⓐ Control Box
ⓑ USB Cable
ⓒ Power adapter
ⓓ Fan Connect Cable
* The above images may be changed or updated without prior notice.
How to connect extension wire and fan connector
* The above images may be changed or updated without prior notice.
Product Specification
Rated Voltage | 110 ~ 240 VAC, 50 / 60 Hz (12 VDC adapter) |
Power Consumption | Max 120W (Total use of 2 fans) |
Control Software | MHServicer Program |
Cable Length | FAN Connetion : 3 meter (3.5m -> 3m from December 1st, 20th) USB : 3 meter |
Assembly
Please refer to the link below for assembly instructions.
Or you can check the product assembly video on the Technical Support tab of the Motion House website.
※ Please check the video posted on the website.
"
MHServicer
MHServicer is MotionGear control software.
MHServicer is software that enables motion simulators to be easily driven
by receiving motion data from content.
MHServicer can easily adjust the range and intensity of motion
to be expressed in the motion simulator
according to the user's preference.
"
Racing | Experience | Flight | etc | Console |
---|---|---|---|---|
- iRacing - Assetto Corsa & Competizione - Race 07 - Grid Autosport - F1 2013 ~ 2020 - Live For Speed - rFactor 1, 2 - The Crew 1, 2 - Project Cars 1, 2, 3 - RaceRoom Racing - WRC 7, 8, 9 - RDS | - Richard Burns Rally - GTA5 - Red Dead Redemption 2 - Automobilista 1, 2 - Grid 1 & 2 - GRALLY - Forza Motorsport 7 - Forza Horizon 4 - KartKraft - Dirt2, 3, 4 - Dirt Rally & 2.0 & Showdown - Euro Truck Simulator 2 - American Truck Simulator - Fernbus Coach Simulator | - Microsoft Flight Simulator X - DCS world - War Thunder (only plane) - X-plane 10, 11 - Falcon4.0 BMS - AeroFly Flight Simulator 2 - No Limits 2 - Prepar3D V4 - Hyper Storm | - Design it, Drive it - Speedboats - MudRunner - Red Rover - MX-Bikes - BeamNG. drive - Touring Karts - V-Racer Hoverbike | [PS4 & Xbox one] - Project Cars 1, 2, 3 - F1 2016 ~ 2020 - Assetto Corsa [Only Xbox one] - Forza Motorsport 7 - Forza Horizon 4 |
How to install and use MHServicer
< Supported Windows 10, 11 [32bit, 64bit] >
Please follow the link below to download the latest version of MHServicer.
For how to use, please refer to the document in the downloaded MHServicer folder.
Click!
"
MotionHouseSDK
MotionHouseSDK can be easily linkage
with game development engines such as Unity / Unreal.
In addition, MotionHouseSDK's motion expression setting function
and motion range setting function can realize various types of
sensation effects required by content.
"
※ For detailed description or technical support for SDK, please contact homepage or motionhouse.master@gmail.com.
AS Warranty period
Personal : 1 Year
Business : Contact us
Please check the Technical Support tab for details.
< The noise generated during fan operation is the noise generated by the fan itself. >
< As it is a normal product with no quality problems, please use it with confidence. >
Model : MH-WindGenerator | |
---|---|
Certificate : KC Code No : R-REM-mh1-MH-WIND Manufacturer / Manufacturing Country : Motion House Co., Ltd. / Korea | Rated Voltage : 220VAC, 50/60Hz (12VDC adapter) Power : Max 120W(Fan 2ea) |
Product Weight - Fan : 0.9 kg(1ea) - ControlBox : 0.8kg - Bracket : 3.5kg | Product Size - FAN : 155 x 215 x 135 (mm) - ControlBox : 130 x 110 x 55 (mm) - Bracket : 815 x 140 x 105 (mm)[Assembly] - Cable Length : 3000 (mm) (3.5m -> 3m from December 1st, 20th) |
Connect : USB 2.0 or 3.0 Data rate : 60 times per second | Control Software : MHServicer Support SDK : Unity, Unreal, C, C++ * Support Emulator |