4UN System
0
1
관리자15 Apr 2022 18:21
Hello.
This is MotionHouse.
First, if you go to the Motion tab of MHServicer, there is a Motion setting at the bottom.
This Motion setting can set the range of motion.
For example, if you try after setting Heave to 100, you can see that the range has changed significantly.
Also MHServicer has been updated to the latest. Please check.
We will try to give you a quick answer next time.
thank you.
This is MotionHouse.
First, if you go to the Motion tab of MHServicer, there is a Motion setting at the bottom.
This Motion setting can set the range of motion.
For example, if you try after setting Heave to 100, you can see that the range has changed significantly.
Also MHServicer has been updated to the latest. Please check.
We will try to give you a quick answer next time.
thank you.
I am using the 4UN system, with firmware 2020060101. I am using the latest Beta version software.
When using the up/down buttons on the controller box, the actuators will extend to 150mm of travel.
When using the software in the Test screen, I only get 75mm of travel on the actuators.
Can anyone please help with what needs to be done here.
Thank you
Cheers
FCII