We are MotionHouse.
Here's how to run F1 2018 in MHServicer.
(The image below is an image captured from a PC, but you can also select the same menu in the Console.)
1. Select GAME OPTIONS.
2. Select Settings.
3. Select Telemetry Settings.
4. Apply the following settings.
UDP Telemetry -> ON
UDP Broadcast Mode ->OFF
UDP IP Address -> IP of PC running MHServicer
UDP Port-> 20777
UDP Send Rate -> 60Hz
UDP Format -> Legacy
5. Activate F1 2018 in the MHServicer, Console tab.
6. Start F1 2018 on the Console device.